|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
Replacing the Calf Guard on the SingleTo replace or remove to install new "T" bolts or calf guard: 1. Open port on seat deck and loosen the wing nuts holding on the seat track that are located inside the hull. 2. Remove the track ends (little plastic stops) from the forward end of the track. 3. Slide the track aft (toward the footstretchers) off the "T" bolts, gently lifting the aft end as you go. You will find that there is a little notch cut in the underside of the seat track that will slide over the top of the T-bolts allowing you to entirely remove the track. 4. Remove calf guard. 5. Replace necessary items and reinstall following directions in reverse order. |
|
Home | Boats | Parts | Boat Care | Articles | Contact | Site Index Maas Boat Company | 1319 Canal Boulevard
| Richmond, CA 94804 |