Installing a Threaded Insert

 

 

To install a threaded insert (holding the wing on an Aero or older Maas 24):

 

  • Remove the bolt from the threaded insert.
  • Put a couple of drops of the threadlocker on the inside diameter of the hole in the boat.
  • Place the insert on the hole (slotted side up) and gently screw insert into place to just below the level of the deck.
  • Let sit for a couple of hours (to be on the safe side) before installing the wing.

 

Copyright:  Maas Boat Company, Inc.  2003

 
AERO | FLYWEIGHT | MAAS 24 | SINGLE SCULL | MAAS DOUBLE
MAIN PAGE | DEALERS | ORDERING INFO | CARBON SERIES | ACCESSORIES
BROCHURES | PRICE LIST | DESIGN AND CONSTRUCTION | CONTACT US
 

MAAS Boat Company | 1319 Canal Boulevard, Richmond, CA 94804
Phone: (510) 232-1612 | Fax: (510) 232-6164 | E-Mail: maasboats@maasboats.com

©Copyright 2003 All Rights Reserved Maas Boat Company, Inc.