Replacing the Calf Guard on the Single

To replace or remove to install new “T” bolts or calf guard:

·        Open port on seat deck and loosen the wing nuts holding on the seat track that are located inside the hull.

·        Remove the track ends (little plastic stops) from the forward end of the track.

·        Slide the track aft (toward the footstretchers) off the “T” bolts, gently lifting the aft end as you go.  You will find that there is a little notch cut in the underside of the seat track that will slide over the top of the T-bolts allowing you to entirely remove the track..

·        Remove calf guard.

·        Replace necessary items and reinstall following directions in reverse order.

Copyright:  Maas Boat Company, Inc.  2003